❤️ Beurer Black Friday
Extra 20%¹ off your favourites!🛍️

Shop 45+ bestselling products this Black Friday.🔥  Use code BLACK2026 for an extra 20%¹ off almost everything.

Your Code: BLACK2026
HEALTHY. LIFE. Style.
Beurer Magazine
A woman sits relaxed in front of the Beurer IL 11 infrared lamp, enjoying the warmth

Everyday Wellbeing

How to use an infrared lamp correctly, step by step

In short: With the IL 35 infrared lamp, you apply the heat in five steps. You set the lamp up securely, tilt it towards the part of your body and choose a distance at which the heat feels pleasant at all times. Then you put on the protective eyewear supplied, set the timer to 5, 10 or 15 minutes and unplug the lamp after use so that it can cool down.

Your nose is blocked, your forehead feels heavy, and the infrared lamp is already on the table. Perhaps you know the device from your family. But when you use an infrared lamp, doing things in the right order matters. Here you will find out how to use our IL 35 infrared lamp in five steps.

What an infrared lamp is for

An infrared lamp delivers targeted heat to specific areas of skin without you touching the device. Infrared radiation is also known as thermal radiation, and infrared lamps are one of its artificial sources.A The heat reaches the body as radiation, without any direct contact.B Infrared light is a form of heat therapy that is intended, among other things, to promote blood circulation and relieve tension.A

With the IL 35, blood flow to the irradiated skin increases, and the metabolic rate in the heated area rises. Our IL 35 infrared lamp is a 150-watt medical device with a three-level electronic timer and a shade with five angle settings. It is intended for use with colds and muscle tension and provides soothing heat.

Alongside other treatment, you can use the IL 35 for ear, nose and throat conditions such as acute rhinitis, as well as for acne and muscle tension. It is suitable for adults who have no sensory impairment.. We explain how to use the heat specifically on your face for sinusitis and frontal sinusitis in a separate guide. Another of our articles gives an overview of further uses of red light.

What to check before first use

Before using the lamp for the first time, it is worth checking that everything is complete and undamaged. The IL 35 comes with the infrared lamp, the protective eyewear and the instructions for use. Ideally, read the instructions for use once at your leisure before you switch the lamp on for the first time.

Tick off these four points before you switch it on for the first time:

  1. Check the lamp and the mains cable for visible damage. If the glass pane or the housing has scratches or cracks, do not use the device if in doubt and contact customer services.
  2. Check that the bulb is securely fitted.
  3. Check the protective eyewear for cracks or holes before you use it for the first time.
  4. Remove metal items such as necklaces, jewellery, piercings, belt buckles or bras from the treatment area, as they can become very hot.

Who wants to get up halfway through a treatment because something is missing? It is best to have a comfortable chair and a free socket within reach beforehand.

Steps 1 to 3: set up, align, find the right distance

The first three steps decide whether the heat reaches the area where you need it and whether it stays pleasant.

Step 1: Set the lamp up securely

Place the IL 35 on a stable, level surface. The device must not be laid down or set up at an angle. Keep it at least 1 metre away from flammable objects, and do not stand the lamp on a tablecloth or carpet. Do not use the device in the bathroom or any other wet environment. Unwind the mains cable completely and arrange it so that no-one will trip over it.

Step 2: Point the lamp at the part of your body

Sit in front of the device so that you can relax and enjoy the treatment. Then tilt the shade until it points at the part of your body you want to warm. With the five angle settings of the IL 35, you can do this without moving the lamp, whether for your forehead, your cheek or a tense neck.

A woman using the Beurer IL 35 infrared lamp at a table

Step 3: Find the right distance

Choose the distance so that the heat feels pleasant on your skin at all times. It depends on how sensitive you are to heat and on the treatment, which is why there is no fixed number of centimetres. The greater the distance from the device, the larger the treatment area and the milder the heat. At a shorter distance, the area becomes smaller and the heat more intense.

But moving closer does not automatically make it feel any better. f you feel unpleasant tingling, itching, burning or too much heat, stop the treatment immediately. Alternatively, increase the distance or shorten the treatment time.

Steps 4 and 5: put on the protective eyewear and set the timer

The protective eyewear and the timer complete your treatment, and after that the IL 35 keeps track of the time.

Step 4: Put on the protective eyewear

Hold the protective eyewear over your eyes and pull the elastic strap over your head. The strap can be adjusted so that the eyewear fits comfortably. You should wear it throughout the treatment and never look directly into the infrared light without it. Always wear it directly over your eyes, not over another pair of glasses. The protective eyewear of the IL 35 meets the EN 171:2002 standard and protects against infrared radiation only.

Step 5: Set the timer

This is how you start the IL 35:

  1. Plug the mains plug into a suitable socket. The “5 min” LED starts flashing, and the device is now in standby mode.
  2. Press the ON/OFF button to switch the device on.
  3. Use the ON/OFF button to select a treatment time of 5, 10 or 15 minutes.
  4. Sit back and enjoy the heat therapy. When the time is up, the device switches off automatically..

The lit LEDs show you which treatment time you have set:

Treatment time Display on the IL 35
5 minutes 1 lit LED
10 minutes 2 lit LEDs
15 minutes 3 lit LEDs

If you want to stop earlier, press the ON/OFF button repeatedly until the “5 min” LED flashes. You can then take off the eyewear.

Side view of the Beurer IL 35 infrared lamp

How long and how often?

To begin with, we recommend a shorter treatment time. For our infrared lamps, the recommended treatment time is 12 to 15 minutes, and you should limit yourself to no more than two treatments a day. Do not use the IL 35 continuously for longer than 15 minutes, and let it cool down before you switch it on again. During the treatment, you should regularly check the irradiated area and how your skin is reacting.

The IL 35 infrared lamp and the IL 50 infrared heat lamp both have an electronic timer with automatic switch-off. If you want to set the time to the minute from 1 to 15 minutes and tilt the shade continuously from 0 to 50 degrees, choose the IL 50. COMPUTER BILD / BILD named the IL 50 test winner in its test „Rotlichtlampen im Test: Welche Infrarotwärme wirklich hilft“ (03.03.2026), in 1st place out of 4 lamps tested. We compare all the models in our range of infrared lamps side by side in a separate article.

Common mistakes when using the lamp

When the heat feels pleasant, it is easy to let your attention slip. Watch out for these three points, each with the right thing to do:

  • Falling asleep in front of the lamp: do not use the device if you are tired and there is a risk of falling asleep during the treatment. In addition, never leave the IL 35 unattended while it is switched on.
  • Using it for too long at a time: Using it for too long at a time: more time does not mean more comfort, because too long an exposure can cause skin irritation and burns. Stick to the treatment time you have set and let the lamp cool down afterwards.
  • Pointing the lamp down at the body from above: the IL 35 is not designed for use from above. So always stand it on a level surface and tilt the shade sideways towards the part of your body.

If your muscles are tense, it is worth looking beyond the lamp. Heat often feels soothing when your muscles are tense, but it often works best when combined with gentle movement or stretching.C Our guide to heat therapy for back pain shows what this can look like in everyday life.

After use: cool down, clean, store

After the treatment, unplug the device and let the IL 35 cool down completely before you move it, clean it or put it away. The bulb and the housing get very hot during use, so the lamp needs a few minutes to rest.

This keeps the lamp in good condition for the next treatment:

  • Cleaning: before cleaning, make sure the device is switched off, unplugged and has cooled down. Clean it after every use with a damp cloth and without solvent-based cleaning products.
  • Cooling down: do not cover the lamp or pack it away while it is still warm.
  • Storage: never wrap the mains cable around the lamp. Ideally, store the device in its original packaging in a dry place.

If the lamp stops lighting up one day, simply replace the bulb. For the IL 35, use only an infrared bulb of the same type as a replacement, and unplug the device before changing it.

Who should not use the infrared lamp

The heat of the IL 35 is not suitable for every person or every situation. Do not use the device in the following cases:

  • with acute rheumatoid arthritis
  • with infectious arthritis
  • with circulatory disorders
  • with decompensated heart failure or severe cardiac arrhythmia
  • with an acute or recent myocardial infarction
  • with uncontrolled diabetes mellitus, hyperthyroidism or adrenocortical insufficiency
  • with infections
  • with open wounds
  • with severe swelling
  • during radiotherapy, including three months after treatment
  • with sensory disturbances in the treatment area
  • on children and elderly people
  • after taking medication or alcohol

In addition, do not use the device on people who are insensitive to heat, or on babies and toddlers. The ability to sense heat can be reduced, for example with diabetes, paraplegia, drowsiness, dementia, disease-related skin changes or scarred skin in the treatment area.

If you have an implant, do not use the device, especially if the implant is in the part of the body to be treated. During pregnancy, do not use the device near the abdomen. In both cases, ask your doctor if you are unsure.

If your skin shows signs of hypersensitivity or an allergic reaction, stop the treatment immediately and talk to a doctor. If your symptoms have not eased after six to eight treatments, stop using the device and seek medical advice. What else applies when you use the heat on your face is explained in a separate guide.

Would you like to enjoy the heat comfortably and within a set time frame? Then take a look at our IL 35 infrared lamp.

Frequently asked questions

Does an infrared lamp help to fight the cold itself?

No, the heat does not fight the infection. But it can ease the feeling of pressure and tension in your nose, forehead or cheeks. You can use the IL 35 alongside other treatment for ear, nose and throat conditions such as acute rhinitis.

How often a day can I use an infrared lamp?

We recommend no more than two treatments a day of 12 to 15 minutes each. To begin with, a shorter treatment time is the better choice.

What should I do if the bulb of my IL 35 stops lighting up?

The bulb of the IL 35 is replaceable. Unplug the device first, let the lamp cool down and use only an infrared bulb of the same type as a replacement.

Can I use an infrared lamp for a tense neck?

Yes, the IL 35 is also intended for muscle tension. Tilt the shade sideways towards your neck and choose a distance at which the heat feels pleasant.

Sources

  1. BfS - Applications of infrared radiation
  2. BfS - Infrared radiation in daily life and technology
  3. NHS - Back pain
As featured in the article

Our product recommendations