❤️ Beurer Black Friday
Extra 20%¹ off your favourites!🛍️

Shop 45+ bestselling products this Black Friday.🔥  Use code BLACK2026 for an extra 20%¹ off almost everything.

Your Code: BLACK2026
HEALTHY. LIFE. Style.
Beurer Magazine
A man sits at a wooden table and measures his blood pressure with the Beurer BM 54 on his left upper arm.

Blood Pressure Management

Measuring blood pressure: which arm, left or right?

In short: There is no one correct arm. For your first measurement, measure on both arms, twice each. From then on, the side with the higher readings becomes your measuring arm. After that, always measure on that arm so that your readings stay comparable.

You unpack your new upper arm blood pressure monitor, put on the cuff and hesitate: left or right? Especially after an unusual reading, you want everything to be right the first time you measure at home. The answer is simpler than a search for “which arm to measure blood pressure” might suggest. There is no arm that is right for everyone, because only your first measurement shows which arm is yours. In this guide, we explain how to find it and why you should stick with it afterwards.

Left or right: which arm should you measure on?

If you are measuring your blood pressure for the first time, you should measure on both arms, twice each. Then compare the results: the arm with the higher reading becomes your measuring arm from now on.A There is no fixed rule for left or right. In some people the higher reading is on the left, in others on the right.

The same applies to our BM 54 upper arm blood pressure monitor. With the Beurer BM 54 you can measure on both arms. At the start, you measure on both sides; after that, always on the arm with the higher readings and always on the same arm. This turns individual measurements into a series that you can compare meaningfully.

Why the readings on your two arms can differ

Differences between the left and right arm are not unusual. However, they can also point to health risks. That is why it is recommended to measure blood pressure on both arms whenever you measure for the first time.A

Where does a difference like this come from?Persistently lower blood pressure in one arm can have medical causes, such as changes in blood flow. Always discuss any such differences with your doctor.B You can read what a large difference means further down.

Part of the difference, however, only arises during the measurement itself. User errors can considerably affect accuracy, for example a cuff that is too tight or too loose, a cuff that is not at heart level, or too short a break between two measurements. Your posture plays a role too. In one study, hands resting in the lap or an arm hanging at the side led to considerably higher readings than an arm resting on a table.C

If your right arm is on the table and your left arm hangs down, the measurement compares not just two arms but also two postures. To make the comparison fair, you should measure on both sides under the same conditions. We have put together the other errors that can creep in in our guide to avoiding errors when measuring blood pressure.

The first measurement on both arms

The first measurement is the most important one, because it decides your measuring arm. At a first visit to the doctor's surgery, blood pressure is ideally measured three times on each arm.B Experts generally advise measuring blood pressure on both arms in order to detect vascular disease early.D For your first measurement at home, you plan for two measurements on each arm.E

How to prepare

With the Beurer BM 54, you should not eat, drink, smoke or do any physical exercise for at least 30 minutes before the measurement. Rest for 5 minutes before the first measurement. Then sit upright with your back supported and place your feet flat on the floor next to each other. Your arm rests on a surface, and the cuff is at heart level. Do not talk or move during the measurement. You will also find all the steps in the instructions for use of the BM 54.

Your arm should be bare for the measurement and resting on a table.F With the BM 54, you should also make sure that no tight clothing restricts the blood flow in your arm.

How the measurement works

  1. Put the cuff on the first arm and measure twice.
  2. Take a break of at least 1 minute before each measurement and between two measurements.
  3. Then switch to the other arm and measure twice there as well.
  4. Write down all four readings with the side and the time.

We also recommend this break of at least one minute for the BM 54. Repeat a measurement if a reading seems doubtful to you. You can find the whole procedure, with every step, in our step-by-step guide to reliable readings at home.

An example from a measurement log

Measurement Left arm Right arm
1st measurement 132/84 mmHg 138/86 mmHg
2nd measurement 130/83 mmHg 136/85 mmHg

In this example, the readings on the right are higher in both measurements, so the right arm becomes the measuring arm. The difference of 6 mmHg in the upper value is small. You can read how to interpret larger differences in the next section.

After that, always on the arm with the higher reading

For all further measurements, the arm with the higher readings is usually used.A Why that one? The higher reading reflects the blood pressure that actually reaches your brain or heart.B If you measured on the arm with the lower reading, your series of measurements might lie below the pressure that matters.

A smiling man measures his blood pressure with the Beurer BM 54 on his left upper arm while sitting at a wooden table.

It is just as important to stick with your arm. With the Beurer BM 54 you therefore always measure on the same arm, the one with the higher readings. If you switch sides in between, a difference between your arms can look like a change in your blood pressure. This is especially true if you are recording a week of measurements for your doctor.

It is best to keep everything else the same as well: the same place at the table, the same sitting position, the same cuff position. That way, differences in your series really tell you something about your blood pressure and not about how you measured.

What a large difference between your arms means

Small differences between the arms are normal, but what matters is how large the difference is in the upper, systolic value. This is how to interpret it:

Difference in the upper value What it means
up to 10 mmHg considered normalD
over 10 mmHg occurs in almost one in three patientsB
20 mmHg or more unusual, affects about 4 % of the population and is usually linked to vascular diseaseD

So a difference of more than 10 mmHg is not a rare finding. But a single reading is not a diagnosis. Before you start to worry, you should repeat the measurement on both arms under the same conditions.

If a clear difference remains, take your measurement log with you to your doctor's appointment. The readings you take yourself with the BM 54 are for your information and do not replace a medical examination. You should therefore discuss them with your doctor, who can find out where the difference comes from.

Exceptions: shunt, lymph node removal, paralysis

Sometimes you have no choice of arm at all, because one arm cannot be used for the cuff. For the Beurer BM 54, the following limits apply:

  • The cuff is not applied to people who have had a mastectomy or lymph node removal.
  • The cuff must not be placed over wounds, as this can cause further injury.
  • The cuff is not applied to an arm whose arteries or veins are undergoing medical treatment, for example an intravascular access, intravascular therapy or an arteriovenous shunt (A-V shunt).
  • The device is not used on people with allergies or sensitive skin.
  • The device must not be used on newborns, children, pregnant women or patients with pre-eclampsia.

After a stroke with paralysis on one side, it is best to measure on the healthy arm. This is easiest if a second person helps you.G If only one arm can be used, it automatically becomes your measuring arm, and there is no need to compare both sides.

Whether you may use a device in your situation is best discussed with your doctor. Also read the instructions for use of the BM 54 before using it for the first time, as they list all contraindications in full.

Finding your measuring arm with the BM 54

We developed the Beurer BM 54 for measuring on the upper arm. It takes the blood pressure measurement fully automatically and indicates incorrect usage if necessary. This is especially helpful for your first measurement on both arms, when you are not yet familiar with every step.

The Beurer BM 54 upper arm blood pressure monitor, front view.

The readings are shown on the easy-to-read XL display and classified on a traffic light scale for a quick overview. To store them, there is also the “beurer HealthManager Pro” app. If you collect your readings there, you can see at a glance whether your series on your fixed arm stays stable. We explain exactly how this works in our article on the “beurer HealthManager Pro” app for managing your blood pressure.

How to use the BM 54 for your measuring arm

  • Put the cuff on correctly: the lower edge of the cuff sits 2 to 3 cm above the crook of your elbow and over the artery. Two fingers should still fit under the closed cuff. A cuff for upper arm circumferences of 22 to 44 cm is included.
  • Two people, separate memories: the device has 2 users with 60 memory spaces each. This keeps your readings on your fixed arm separate from your partner’s.
  • Average values at a glance: the BM 54 calculates the average value of all stored readings as well as the morning and evening blood pressure for the last 7 days.
  • Heart rhythm alert: the arrhythmia indicator warns of a possible irregular heart rhythm. An alert like this should always be checked by a doctor.

We give a 5-year guarantee on the BM 54. If you are still deciding which device suits you, you will find all models in our overview of upper arm blood pressure monitors. If you prefer to measure at the wrist, we explain in a separate guide how to get precise readings at the wrist. Our blood pressure monitors give you an overview of the whole range.

Once you have found your measuring arm, the easy part begins: measure, write it down, compare, always on the same side. Take a look at the Beurer BM 54

Frequently asked questions

Which arm should I measure my blood pressure on, left or right?

There is no one correct arm. The first time, you measure twice on each arm and compare the results. The arm with the higher reading is your measuring arm, and you always use it from then on.

Why are my blood pressure values so different on each arm?

Slight differences between the arms are common. They are often caused by the measurement itself, for example a different posture, a cuff that has slipped or a break that was too short. So measure on both sides under the same conditions and repeat the measurement if in doubt.

How big can the difference between my arms be?

A difference of up to 10 mmHg in the upper value is considered normal. A difference of 20 mmHg or more is unusual. If repeated measurements show a clear difference, mention it to your doctor.

Sources

  1. How to measure your blood pressure at home | Blood Pressure UK
  2. pharmazeutische-zeitung.de
  3. Arm Position and BP Readings | American College of Cardiology
  4. aerzteblatt.de
  5. stiftung-gesundheitswissen.de
  6. Blood pressure test | NHS
  7. schlaganfall-hilfe.de
As featured in this article

Our product recommendations