WL 75

To connect the WL 75 with the app, you must first select the option "Pair device". Subsequently, the WL 75 will be displayed. Choose this to pair the device.

In the event that the app does not connect with your WL 75, this could have various reasons:

• Access to the location was denied.
• Bluetooth^® is not activated on the smartphone.
• The smartphone does not support Bluetooth^® 4.0.

Please deactivate the sleep mode in your app and try to apply the desired settings again.

The radio broadcaster in sleep mode is oriented towards the already preset station. To change this, please click in the menu on "Radio" and take the settings for further stations here.

To facilitate your gentle awakening, the simulated dawn light (simulating sunrise) activates before the set alarm. The duration of the dawn light depends on the preset duration of the sunrise. Should you wish to test this function, the selected alarm time must be set at least for the duration of the dawn light plus one minute in the future.

To connect the WL 75 with the app, you must first select the option "Pair device". Subsequently, the WL 75 will be displayed. Choose this to pair the device.

In the event that the app does not connect with your WL 75, this could have various reasons:

• Access to the location was denied.
• Bluetooth^® is not activated on the smartphone.
• The smartphone does not support Bluetooth^® 4.0.

Start the app "beurer LightUp" and search for your WL 75. Should the device not be displayed, please check whether Bluetooth^® is activated both on your smartphone and in the device settings of your WL 75. To activate the Bluetooth^® of your device, press the SET button until the Bluetooth^® symbol appears in the display. Keep the SET button pressed until the word "on" blinks on the display. If the pairing does not function thereafter, briefly disconnect your WL 75 from the power and/or restart your smartphone.

If your radio reception should be improved, you can enhance it by repositioning the antenna.

A triggered wake-up function is recognised by you at the respective alarm symbol on the display of the WL 75.

The manual operation of the WL 75 is only possible if there is no active Bluetooth^® connection to the app. For this reason, you must manually operate the WL 75 using the app "beurer LightUp".

The keys of the WL 75 can be deactivated in the app settings.

You can use the WL 75 without the app "beurer LightUp". 
However, to fully use your wake-up light, you need the app "beurer LightUp". Here are additional functions available to you:

• Setting of the alarm day
• Brightness and duration of the sunrise
• Duration of the snooze function
• Sound level of the alarm
• Choice between warm sunrise light or energy-saving light
• Timer function for sunset
• Choice between different stimulation light scenes
• Toggling the device's buttons on and off

You can use the functions of the WL 75 even without an active Bluetooth^® connection. For this reason, a permanent connection to your smartphone is not necessary.