EasyFit

The heart rate monitors PM55, PM80 und WM80 include an interface to transfer data to the PC where they can be analysed. To transfer data from these heart rate monitors to the PC you need the program „EasyFit“ and a driver is required.

The program and the driver are on the enclosed CD. You can also download the driver in the sector „Driver installation“. Please notice the installation instruction in your CD booklet in any rate. The installation instruction is also available in the sector „Driver installation“.

General information about data transfer:

For your data transfer with the USB cable please always use the same USB port of your computer. Connect the USB cable for every data transfer. Don’t let the USB cable be connected permanently. Please remove the USB connectors of available scanners from your PC before starting the data transfer.

Driver installation:

Here you can download the required files for the driver installation
Please read the installation manual „Install_Readme.pdf“ carefully before starting the installation. If you have problems with the driver installation please read the FAQ to the topic. 

Driver deinstallation:

If a driver uninstalling is necessary please read the information and tips therefore in the file „Uninstall_Readme.pdf".
Here you can download the required files for driver deinstallation.

VISTA-compatible drivers for the EASYFIT program:

If you use VISTA you need an additional driver which you can download here. Please refer to the installation instructions for VISTA: "Install_Readme_VISTA.pdf".

Easyfit Update

Here you can download the Software-Update for Easyfit.